Lighting Shaping Switcher
Peribounce, another secondary lighting solution!
Embedded Files
How to assemble SUN-Diffuser
1x "U" Frame(1 x Frame body + 2x Rod) 1x Boom stick, 1x Connecting Clamp, 1x Bag, 1x Fabric
Connect the segmented frame, Elastic cord within the frames will guide you.
2. Slide each rod, jalf way into each side of the fabric.
3. Place the rod at each connecting point and tilt the angle of entry of the rods at(approx. 15degree andgle) to the frame body then insert to complete the full "U" Frame.
4. Pull down the halfway placed fabric all the way towards the frame body.
5. Attach the fabric with welcro to the frame body, in a wrapping motion.
6. Using the connecting clamp, connect the "U" frame to the boom stick.
토브그룹(주) | TOVGROUP INC.
URL : www.tovgroup.kr | MAIL : tovworks@gmail.com | TEL : 02-517-1212 | FAX : 02-517-1211
Address : (05062) 서울시 광진구 자양로 15길 105-10, 1층 | 1F, 105-10, Jayangro15gil, Gwangjin-gu, Seoul, Korea
Page updated
Google Sites
Report abuse